You are currently exploring our in-stock options for part number SS5116-10-52 with the NSN 5306012740036. This product is listed with the description “Bolt Close Tolerance” and is manufactured by Sikorsky Aircraft Corporation. If you are looking to purchase this part, we encourage you to complete and submit the RFQ form below with as much information as you can provide, such as your desired quantity, budget, shipping time frame, and more. Within 15 minutes of receiving and reviewing your submission, one of our experts will reach out with a quote that is tailored to your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We supply all relevant information alongside the listings on our website, that way you know you are always getting the exact item you require. For example, part number SS5116-10-52 is listed alongside the NSN 5306-01-274-0036 and belongs to the FSC 5306 Bolts. Additionally, it is also under the CAGE Code 78286, which is assigned to Sikorsky Aircraft Corporation. At Aerospace Procurement, you can trust that each product in our inventory is up to industry standards, as we are committed to various quality assurance practices. For example, we uphold a strict NO CHINA SOURCING pledge to ensure that each part is shipped out alongside its manufacturer trace documentation and qualifying certifications. These practices and more allow us to operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. Get in contact with us today to see how we can make the procurement process for part number SS5116-10-52 seamless.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-274-0036 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 012740036 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SS5116-10-52 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| ANEE | GRIP LENGTH | 3.240 INCHES MINIMUM AND 3.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | 54800 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.968 INCHES MINIMUM FIRST HOLE AND 4.018 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | ASUPPLY WITH DOG TYPE POINT 0.499 IN. MIN AND 0.552 IN. MAX. DIAMETER; 0.537 IN. NOMIANL LENGTH WITH GROOVE PIN MADE OF 300 DERISED CRES PER FED-STD-66; APPLY DRY FILM LUBRICANT TO PAWL/RETAINER |
| MATT | MATERIAL | STEEL COMP 302B SPRING OR STEEL COMP 304 SPRING OR STEEL COMP 631 SPRING |
| MATT | MATERIAL | STEEL COMP 303 POINT OR STEEL COMP 303MA POINT OR STEEL COMP 303PB POINT OR STEEL COMP 303 PLUS X POINT OR STEEL COMP 303SE POINT |
| MATT | MATERIAL | STEEL COMP XM-13 FASTENER |
| MATT | MATERIAL | STEEL COMP XM-13 STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A580 ASSN STD 1ST MATERIAL RESPONSE SPRING OR ASTM A580 ASSN STD 2ND MATERIAL RESPONSE SPRING OR AMS5678 ASSN STD 3RD MATERIAL RESPONSE SPRING |
| SFTT | SURFACE TREATMENT | PASSIVATE FASTENER |
| SFTT | SURFACE TREATMENT | PASSIVATE SPRING |
| SFTT | SURFACE TREATMENT | PASSIVATE STAND-OFF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.476 INCHES MINIMUM AND 1.526 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 4.736 INCHES MINIMUM AND 4.766 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| AASU | HEAD HEIGHT | 0.608 INCHES MINIMUM AND 0.628 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.672 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
