You are currently exploring our in-stock options for part number 717801828-001 with the NSN 5905013471997. This product is listed with the description “Resistor Variable Nonwire Wound” and is manufactured by Lockheed Martin Corporation. If you are looking to purchase this part, we encourage you to complete and submit the RFQ form below with as much information as you can provide, such as your desired quantity, budget, shipping time frame, and more. Within 15 minutes of receiving and reviewing your submission, one of our experts will reach out with a quote that is tailored to your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We supply all relevant information alongside the listings on our website, that way you know you are always getting the exact item you require. For example, part number 717801828-001 is listed alongside the NSN 5905-01-347-1997 and belongs to the FSC 5905 Resistors. Additionally, it is also under the CAGE Code 04939, which is assigned to Lockheed Martin Corporation. At Aerospace Procurement, you can trust that each product in our inventory is up to industry standards, as we are committed to various quality assurance practices. For example, we uphold a strict NO CHINA SOURCING pledge to ensure that each part is shipped out alongside its manufacturer trace documentation and qualifying certifications. These practices and more allow us to operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. Get in contact with us today to see how we can make the procurement process for part number 717801828-001 seamless.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-347-1997 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 013471997 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 717801828-001 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.906 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8650 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 0.40 INCH-OUNCES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AGAV | END ITEM IDENTIFICATION | LANTIRNNAVPOD |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 0.522 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -5.0 TO 5.0-65 DEG CELSIUS SINGLE SECTION AND-4.0 TO 4.0-15 DEG CELSIUS SINGLE SECTION AND-2.5 TO 2.5 0 DEG CELSIUS SINGLE SECTION AND-2.5 TO 2.5 50 DEG CELSIUS SINGLE SECTION AND-5.0 TO 5.0 75 DEG CELSIUS SINGLE SECTION AND-5.0 TO 5 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| SPCL | SPECIAL TEST FEATURES | RESISTORS SUPPLIED ARE INTENDED FOR USE IN FLIGHT HARDWARE |
| AAPN | SECTION QUANTITY | 1 |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | CLAMP |
| TEST | TEST DATA DOCUMENT | 04939-717801828 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.810 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | CLAMP RINGS ARE NOT ACCEPTABLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
