Buy Online KDP328-12-066C Part by Kamatics Corporation within NSN 3120-01-333-9997

Part Number: KDP328-12-066C

Alternate P/N: KDP32812066C

Manufacturer: Kamatics Corporation

NSN: 3120-01-333-9997

NIIN: 013339997

Item Name : Bearing Sleeve

CAGE Code: 50632

FSC: 3120 Bearings Plain Unmounted

FSG: 31 Bearings

Country: USA

NCB Code: 01

You are currently exploring our in-stock options for part number KDP328-12-066C with the NSN 3120013339997. This product is listed with the description “Bearing Sleeve” and is manufactured by Kamatics Corporation. If you are looking to purchase this part, we encourage you to complete and submit the RFQ form below with as much information as you can provide, such as your desired quantity, budget, shipping time frame, and more. Within 15 minutes of receiving and reviewing your submission, one of our experts will reach out with a quote that is tailored to your needs.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

We supply all relevant information alongside the listings on our website, that way you know you are always getting the exact item you require. For example, part number KDP328-12-066C is listed alongside the NSN 3120-01-333-9997 and belongs to the FSC 3120 Bearings Plain Unmounted. Additionally, it is also under the CAGE Code 50632, which is assigned to Kamatics Corporation. At Aerospace Procurement, you can trust that each product in our inventory is up to industry standards, as we are committed to various quality assurance practices. For example, we uphold a strict NO CHINA SOURCING pledge to ensure that each part is shipped out alongside its manufacturer trace documentation and qualifying certifications. These practices and more allow us to operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. Get in contact with us today to see how we can make the procurement process for part number KDP328-12-066C seamless.

NSN Information for Part Number KDP328-12-066C with NSN 3120-01-333-9997, 3120013339997

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-333-9997 Item PartTypeName: BEARING,SLEEVE	3120	013339997	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
KDP328-12-066C	5	1	5

Characteristics Data of NSN 3120-01-333-9997, 3120013339997

MRC	Criteria	Characteristic
AEPR	FLANGE OUTSIDE DIAMETER	1.1600 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE
ABHP	OVERALL LENGTH	0.7220 INCHES NOMINAL
BZLX	CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE OUTSIDE RIGHT CORNER
MATT	MATERIAL	STEEL COMP 630 LARGEST OUTSIDE DIAMETER
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE AND CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF BODY AND CHROMATE RIGHT END SURFACE OF BODY
ADAS	BODY INSIDE DIAMETER	0.7390 INCHES MINIMUM AND 0.7410 INCHES MAXIMUM
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF FLANGE AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF LEFT FLANGE AND CHROMATE RIGHT END SURFACE OF LEFT FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END
ZZZK	SPECIFICATION/STANDARD DATA	80632-04A061 MANUFACTURERS STANDARD
ADAR	BODY OUTSIDE DIAMETER	0.9388 INCHES MINIMUM AND 0.9394 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM LEFT END SURFACE OF BODY AND FLANGE AND 37.0 ROCKWELL C MAXIMUM LEFT END SURFACE OF BODY AND FLANGE
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF BODY
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF LEFT FLANGE AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF LEFT FLANGE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC POLYAMIDE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF BODY AND CHROMATE OUTSIDE DIAMETER SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY