Buy Online TX1027C5-10A Part by Huck International Inc within NSN 5305-01-526-3950

Part Number: TX1027C5-10A

Alternate P/N: TX1027C510A

Manufacturer: Huck International Inc

NSN: 5305-01-526-3950

NIIN: 015263950

Item Name : Screw Close Tolerance

CAGE Code: 17446

FSC: 5305 Screws

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

You are currently exploring our in-stock options for part number TX1027C5-10A with the NSN 5305015263950. This product is listed with the description “Screw Close Tolerance” and is manufactured by Huck International Inc. If you are looking to purchase this part, we encourage you to complete and submit the RFQ form below with as much information as you can provide, such as your desired quantity, budget, shipping time frame, and more. Within 15 minutes of receiving and reviewing your submission, one of our experts will reach out with a quote that is tailored to your needs.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

We supply all relevant information alongside the listings on our website, that way you know you are always getting the exact item you require. For example, part number TX1027C5-10A is listed alongside the NSN 5305-01-526-3950 and belongs to the FSC 5305 Screws. Additionally, it is also under the CAGE Code 17446, which is assigned to Huck International Inc. At Aerospace Procurement, you can trust that each product in our inventory is up to industry standards, as we are committed to various quality assurance practices. For example, we uphold a strict NO CHINA SOURCING pledge to ensure that each part is shipped out alongside its manufacturer trace documentation and qualifying certifications. These practices and more allow us to operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. Get in contact with us today to see how we can make the procurement process for part number TX1027C5-10A seamless.

NSN Information for Part Number TX1027C5-10A with NSN 5305-01-526-3950, 5305015263950

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-526-3950 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	015263950	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
GS1014C5-10A	5	2	3

Characteristics Data of NSN 5305-01-526-3950, 5305015263950

MRC	Criteria	Characteristic
AASL	HEAD DIAMETER	0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM"
AAUJ	SPLINE MAJOR DIAMETER	0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.312 INCHES NOMINAL"
AAVA	POINT DIAMETER	0.469 INCHES NOMINAL"
ABQJ	POINT STYLE	FLAT"
ABQZ	INTERNAL DRIVE STYLE	TORX"
AHYM	NOMINAL THREAD DIAMETER	0.312 INCHES"
ANEE	GRIP LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	24"
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS"
FEAT	SPECIAL FEATURES	125 KSI SHEAR STRENGTH"
MATT	MATERIAL	NICKEL ALLOY 718 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM"
AASB	FASTENER LENGTH	1.079 INCHES MINIMUM AND 1.109 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT COUNTERSUNK"
AASL	HEAD DIAMETER	0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM"
AAUJ	SPLINE MAJOR DIAMETER	0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.312 INCHES NOMINAL"
AAVA	POINT DIAMETER	0.469 INCHES NOMINAL"
ABQJ	POINT STYLE	FLAT"
ABQZ	INTERNAL DRIVE STYLE	TORX"
AHYM	NOMINAL THREAD DIAMETER	0.312 INCHES"
ANEE	GRIP LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	24"
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS"
FEAT	SPECIAL FEATURES	125 KSI SHEAR STRENGTH"
MATT	MATERIAL	NICKEL ALLOY 718 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM"
AASB	FASTENER LENGTH	1.079 INCHES MINIMUM AND 1.109 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT COUNTERSUNK"