You are currently exploring our in-stock options for part number 18-3137 with the NSN 5340014483222. This product is listed with the description “Standoff Threaded Snap In” and is manufactured by Drs Power And Control Technologies. If you are looking to purchase this part, we encourage you to complete and submit the RFQ form below with as much information as you can provide, such as your desired quantity, budget, shipping time frame, and more. Within 15 minutes of receiving and reviewing your submission, one of our experts will reach out with a quote that is tailored to your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We supply all relevant information alongside the listings on our website, that way you know you are always getting the exact item you require. For example, part number 18-3137 is listed alongside the NSN 5340-01-448-3222 and belongs to the FSC 5340 Hardware Commercial. Additionally, it is also under the CAGE Code 27192, which is assigned to Drs Power And Control Technologies. At Aerospace Procurement, you can trust that each product in our inventory is up to industry standards, as we are committed to various quality assurance practices. For example, we uphold a strict NO CHINA SOURCING pledge to ensure that each part is shipped out alongside its manufacturer trace documentation and qualifying certifications. These practices and more allow us to operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. Get in contact with us today to see how we can make the procurement process for part number 18-3137 seamless.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-448-3222 Item PartTypeName: STANDOFF,THREADED,SNAP-IN | 5340 | 014483222 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18-3137 | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| AAJD | Thread Class | 2B RIGHT INTERNAL |
| AAJF | Thread Direction | RIGHT-HAND RIGHT INTERNAL |
| AAJF | Thread Direction | LEFT-HAND LEFT EXTERNAL |
| CXYF | Left Projection Chamfer Angle | 45.0 DEGREES NOMINAL |
| CQJX | Nominal Thread Size | 0.190 INCHES LEFT EXTERNAL |
| AATB | Width Between Flats | 0.375 INCHES NOMINAL |
| CRTL | Criticality Code Justification | ZZZY |
| ABRY | Length | 4.000 INCHES NOMINAL |
| CXXX | Right Projection Length | 0.374 INCHES NOMINAL |
| SFTT | Surface Treatment | PASSIVATE STANDOFF |
| TEST | Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THSD | Thread Series Designator | UNC RIGHT INTERNAL |
| AAJD | Thread Class | 2A LEFT EXTERNAL |
| THSD | Thread Series Designator | UNF LEFT EXTERNAL |
| CQJX | Nominal Thread Size | 0.138 INCHES RIGHT INTERNAL |
| SPCL | Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| CMLP | Thread Quantity Per Inch | 32 RIGHT INTERNAL |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| CMLP | Thread Quantity Per Inch | 32 LEFT EXTERNAL |
| STDC | Surface Treatment Document And Classification | QQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE STANDOFF |
| AASA | Thread Length | 0.265 INCHES NOMINAL LEFT EXTERNAL |
| CXYD | Right End Chamfer Angle | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
| MATT | Material | STEEL COMP 303 STANDOFF |
| MDCL | Material Document And Classification | STM A581 ASSN STD SINGLE MATERIAL RESPONSE STANDOFF |
| CXXW | Right Projection Diameter | 0.190 INCHES NOMINAL |
| STYL | Style Designator | LEFT INTERNAL AND RIGHT EXTERNAL THREAD |
| ZZZW | Departure From Cited Document | AS MODIFIED BY MATERIAL AND LOCKING FEATURE( AS APPLICABLE ) |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
