You are currently exploring our in-stock options for part number 12460369-5 with the NSN 2520014743901. This product is listed with the description “Shaft Axle Automotive” and is manufactured by Am General Llc. If you are looking to purchase this part, we encourage you to complete and submit the RFQ form below with as much information as you can provide, such as your desired quantity, budget, shipping time frame, and more. Within 15 minutes of receiving and reviewing your submission, one of our experts will reach out with a quote that is tailored to your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We supply all relevant information alongside the listings on our website, that way you know you are always getting the exact item you require. For example, part number 12460369-5 is listed alongside the NSN 2520-01-474-3901 and belongs to the FSC 2520 Vehicle Power Transmission Components. Additionally, it is also under the CAGE Code 34623, which is assigned to Am General Llc. At Aerospace Procurement, you can trust that each product in our inventory is up to industry standards, as we are committed to various quality assurance practices. For example, we uphold a strict NO CHINA SOURCING pledge to ensure that each part is shipped out alongside its manufacturer trace documentation and qualifying certifications. These practices and more allow us to operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. Get in contact with us today to see how we can make the procurement process for part number 12460369-5 seamless.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-01-474-3901 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 014743901 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| EX4855-2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
